Collection: A2L Refrigerants

A2L refrigerants have lower toxicity and are mildly flammable under ASHRAE Standard 34. Two A2L refrigerants are used in most new residential and light commercial air conditioning and heat pump equipment: R-32 and R-454B. Refrigerant Inc sells both to EPA Section 608 certified technicians and to buyers who employ one.

Choose by the equipment nameplate

  • R-32: a single-component A2L refrigerant (GWP 675 in EPA's SNAP table). Sold in 1.43 lb and 20 lb sizes.
  • R-454B: an A2L blend of R-32 and R-1234yf (GWP 470 in EPA's SNAP table). Sold in 2 lb and 20 lb sizes.

Use the refrigerant named on the equipment nameplate. Neither refrigerant is a drop-in replacement for R-410A in an existing system. EPA lists both for new equipment designed for them.

Before you order

  • A2L cylinders typically use left-hand-thread valve outlets, and standard hoses need an adapter. Read our guide to A2L cylinder adapters.
  • Use recovery equipment, gauges and leak detectors rated for A2L refrigerants.
  • Servicing an R-410A system? Use R-410A. EPA states that its Technology Transitions rule does not restrict servicing of existing systems.
  • Read the R-410A to A2L transition guide for the dates and rules, with EPA sources.

Common questions

What does A2L mean?

A2L is a refrigerant safety class from ASHRAE Standard 34. A2L refrigerants have lower toxicity and are mildly flammable, with a low burning velocity. R-32 and R-454B are both A2L.

Can I put R-32 or R-454B in an R-410A system?

No. EPA's SNAP listings for both refrigerants are for new equipment designed for them. Keep using R-410A to service systems built for R-410A.

Do I need a special certification for A2L refrigerants?

EPA's Section 608 page lists Type I, Type II, Type III and Universal and does not list a separate federal A2L credential. Section 608 certification is needed to buy and handle refrigerant, and manufacturers or local codes may require additional A2L safety training.

Sources